LX avionics Ltd

Includes rear cockpit LCD Vario and separate Graphic Display unit, and all cabling (plug and play). This enables the second seat occupant to operate the rear cockpit vario system independantly of the front one. Works with LX 7007 and 8000

 

 

 

Price £950.00 excluding VAT, £1,116.25 including VAT.

As supplied with the LX 5000, LX 160Si (specify vario type when ordering)

 

 

Price £165.00 excluding VAT, £193.87 including VAT

 

Generates voice warnings; plug and play with LX 8000/7007

 

Features:
* Very small
* Simply connect to LX 8000/7007 system bus
* No additional speakers necessary
* SD Card slot
* Default warnings:
      Gear up approach
      (triggered by custom input or near airport info)
      Airspace Warning
      Altitude
      Inside sector
* Will interface with LX Flarm

Price: £200.00 excl VAT; £235.00 incl VAT

LX Voice Module - Stand alone

Flarm compatible input, speaker included

Price: £220.00 excl VAT; £258.50 incl VAT

Stick Control Unit

Fits on top of the control column to provide stick-top remote operation of the LX 7000/7007/8000. PTT is integral as centre button (available with 18mm (DG), 20mm (Schempp) or 24mm (Schleicher) internal diameter, specify with order).

All versions the same price, but LX8000 has a different stick top.

Price £234.89 excluding VAT, £276.00 including VAT

Order as follows:

Remote control LX7007/7000/5000 18mm
LX-REM-K-18mm (DG)

Remote control LX7007/7000/5000 20mm
LX-REM-K-20mm (Schempp)

Remote control LX7007/7000/5000 24mm
LX-REM-K-24mm (Schleicher)

Remote control LX8000 18mm
LX8REM-K-18mm (DG)

Remote control LX8000 20mm
LX8REM-K-20mm (Schempp)

Remote control LX8000 24mm
LX8REM-K-20mm (Schleicher)

Remote Upgrade Kit LX7000/7 series to LX8000
Price £28.00 excl VAT, £32.90 incl VAT
LX8REM-K-24mm

 

This is a completely new design of compass module that interconnects with the LX8000/7007 to give higher accuracy heading readings than is possible with GPS alone. suitable for LX8000, LX7007, LX7000 and LX5000

Price £405.00 excl VAT; £475.87 incl VAT

The data connection and power supply unit for connecting an iPAQ to the following LX Navigation instruments - LX 5000, LX 7000, LX 160s, LX 20, Colibri. (LX 7007, LX 1600 and LX160Si version 3.04 do not require an iPAQ adapter.)

Power specifications - input 8-36V, output 5V 3A

Specify iPAQ model with your order.

Price £74.50 excluding VAT, £87.54 including VAT

Price £145.00 excluding VAT, £170.37 including VAT

 

AC/DC power and data cable and transformer
£28.00 excl. VAT; £32.90 incl. VAT

12v cable with RJ45 connectors
Price £8.00 excluding VAT, £9.40 including VAT

12v power supply with RS232
Price £10.00 excl VAT, £11.75 incl VAT

The LX 7000 can have a number of other units connected to the system and there are two types of splitting unit connectors normally used to facilitate this. Where the system is ordered as, for example, a double instrument for a 2-seater or if a Remote Control is specified, then the necessary splitter will normally be provided as part of the supplied installation package. In other cases a splitter will need to be provided separately. There are two types in common use:

 

 

Price £44.50 excluding VAT,
£52.29 including VAT

 

 

Price £44.50 excluding VAT,
£52.29 including VAT

 

Connects LX7007 to second PDA

 

 

 

 

Price £54.00 excl VAT, £63.45 incl VAT

Connects Colibri to PDA

Price £54.00 excl VAT, £63.45 incl VAT

Allows NMEA switching between LX7007 - PDA - Colibri

Price £54.00 excl VAT, £63.45 incl VAT

Full cable set with mount and AC-Power supply unit

 

 

Price £42.55 excl VAT; £49.99 including VAT
(Colibri mount on its own: £12.00 excl VAT, £14.10 incl VAT)
AC Power Supply on its own:£28.00 excl VAT:£32.90 incl VAT

Required for connection of duplicate vario displays

 

 

 

Price £15.32 excl VAT; £18.00 incl VAT

This comprises a 4 m cable and suitable connectors to enable a LX 16 to operate a second display in the rear cockpit

 

Price £15.32 excl VAT; £18.00 incl VAT

Cable connects the LX vario unit to the iPAQ and provides power and data. (Specify whether your iPAQ is 37xx, 36xx, 31xx or the later standard from iPAQ 38 and on, as connector protocol differs.)

 

Price £27.50 excl VAT: £32.31 incl VAT

Price £45.00 excl VAT: £52.87 incl VAT

Connects LX 1600 or LX 160Si to Colibri (supplied as standard with instrument, RJ45 connectors)

 

 

Price £15.32 excl VAT; £18.40 incl VAT

Connects PC (serial port) to 5 pin round connector on panel

 

 

 

Price £27.50 excl VAT; £32.31 incl VAT

Connects panel 5 pin connector to iPAQ (specify model of iPAQ)

 

 

 

Price £27.50 excl VAT; £32.31 incl VAT

LX8000 USB memory stick connector, panel mount. (Memory stick not included)

 

Price £45.00 excl VAT, £52.87 incl VAT

Ultra Small and Light (see adjacent photo for size comparision)

 

 

 

 

Price £40.00 excluding VAT, £47.00 including VAT

 

Same as the non-magnetic unit illustrated above, but it has an integral magnet.

Price £45.00 excluding VAT, £52.87 including VAT

 

Price £25.00 excluding VAT, £29.37 including VAT

Price £14.45 excluding VAT, £16.98 including VAT

 

Price £16.98 excluding VAT, £19.95 including VAT

Overview
The unit has been developed to make it possible to supply PDA and PNA units, which do not have physical RS 232 ports, with GPS data from a LX 7007 or LX 1600. The connection is plug-and-play and no installation work is required.

Read more about LX Bluetooth interface

Price: £90.00 excl VAT; £105.75 incl VAT

Upgrade LX 160 to version 2.12 or upgrade LX 160S to version 3.04. Specifiy model when ordering Eprom

 

 

 

Price £35.00 excluding VAT, £41.12 including VAT

To version 2.1 (Flarm support)
Price £50.00 excl VAT, £58.75 incl VAT.

 

Free PDA software and other programs available at www.lxnavigation.si (Look for LX Mobile, LX Connect and LXe).