LX avionics Ltd

AR 4201 Transceiver

AR 4201 VHF TRANSCEIVER 2 1/4" (57 mm) MOUNT

Even smaller & lighter than its forerunner, the legendary AR 3201, the AR 4201 is ideal for installation in gliders, motor gliders and light aircraft due to its low power consumption, minimal panel cut out and module/connector depth. One of the best selling and performing products in the Becker portfolio, quick, safe & simple operation. Over 18,000 now in use.

Principal features:

• Frequency from 118.00MHz to 136.975MHz
• 25 kHz channel spacing, 760 channels
• Carrier power nominal 7 W, 14 V DC
• Emergency operating Voltage: 10.5VDC
• Dynamic Microphone
• External audio input
• Operating temperature – 20 °C to +55 °C (short-time +70 °C)
• Active / preset frequency
• Memory channels: 99
• Weight: 0.67Kg
• Size: 61x61x192mm, 57mm panel cut out
• Certification: TSO-C37d?C38d: JTSO-2C37d/2C38d

Additional Benefits: Worldwide Net of licensed Becker-Service-Points.

Supplied boxed with Handbook and EASA Form 1

Becker supplied connector is an additional cost with 2 versions offered (see below)
A compatible connector (not from Becker) is, however, included by LX avionics with each AR 4201:

Price £999.00 excl VAT: £1,198.90 incl VAT

Becker connector – available on request as follows:

Options: Connector kit (soldering) CK 4201-S £25.00 excl VAT; £ 30.00 incl VAT

Connector kit (crimp) CK 4201-C £50.00 excl VAT : £60.00 incl VAT

AR 6201 Transceiver - In Stock

AR 6201 VHF TRANSCEIVER 2 1/4" (57 mm) MOUNT

Becker Avionics International has launched a successor to the legendary AR 4201, of which over 18,000 have been built so far, that represents a quantum leap forward in performance, technical sophistication and robustness.

The AR6201 VHF-AM transceiver has state-of-art DSP (Digital Signal Processing) technology. It is mountable in the 2¼ inch standard instrument panel recess and is equipped with a highly efficient AM transmitter, a very sensitive receiver and a full graphic LC-display that allows for easy reading under all light conditions, including full sun. Push button and knob operation. Display illumination can be dimmed. The AR6201 is, of course, prepared for 8.33 kHz spacing that will become the new international standard for airborne communication. Switching between the 8.33 and the 25 kHz mode is therefore made effortlessly simple. Standard or dynamic microphones can be used. A built-in-test facility increases flight safety. The dual watch mode that allows scanning of two different channels is an extra feature. The AR6201, with its integrated VOX/Intercom circuit, allows communication between pilot and co-pilot without the need for a separate intercom.

The AR6201 will continue the Becker airborne radio success story far into the 21st century.

Principal features:

• Frequency Range: 118.000 MHz to 136.990 MHz
• Channel Spacing: 8.33 or 25 kHz
• Channel Selection: 8.33 or 25 kHz (selectable)
• Active / preset frequency
• Memory channels: 99 with alphanumeric storage
• Dual freq watch
• VOX intercom
• Standard or dynamic microphone
• RF-Output Power: > 6 W (carrier power)
• Emergency operating Voltage: 9.0 VDC
• Input Voltage Range: 11 V DC to 36 VDC
• Operating Temperature Range: -20°C to +55°C, for short time up to +70°C
• Current consumption: 1.6 A @12 V DC (transmit), 85mA@12 V DC (receive standby)
• Weight: 0.83Kg
• Size: 61x61x192mm, 57mm panel cut out
• Certification: ETSO-2C37e and 2C38e / TSO-C169a

Additional Benefits: Worldwide Net of licensed Becker-Service-Points

Supplied boxed with Handbook and EASA Form 1

Becker supplied connector is an additional cost with 2 versions offered (see below)
A compatible connector (not from Becker) is, however, included by LX avionics with each AR 6201:

Price: £1299.00 excl VAT; £1558.80 incl VAT

Becker connector – available on request as follows:

Options: Connector kit (soldering) CK 4201-S £25.00 excl VAT; £30.00 incl VAT

Connector kit (crimp) CK 4201-C £50.00 excl VAT : £60.00 incl VAT

Becker TRANSPONDERS

Becker BXP6401-2-(01) 150W Mode S Transponder
(Class 2 – below 15,000ft)

This is a single box system that fits in a 57mm panel cut-out. The Mode-S ICAO address is stored in a separate address module AM 6400-1-(01) which is included with each unit. The unit requires a separate alticoder which does not have to be from Becker. (A Becker alticoder is available part number BE6400-01-(01) alticoder for £195.00 excl VAT if purchased with the transponder). Becker do not include connectors and these are extras.

Principal features:

Based on proven ultra-compact and robust equipment technology, outstanding performance and low power-consumption. Utilizing an external address-module for air-craft data. This unique solution prevents programming errors and offers advantages in case of maintenance.

• Transmit power>=150 Watt
• VFR/IFR operation up to 50.000 feet.
• Standard input for parallel Blind-Encoder,
• Supplementary serial input for Becker Blind-Encoder
• RS 422/RS 232 interface for ADSB-capability in combination with suitable data-source
• Supply voltage 14 to 33 V DC
• Software certified to DO178 B Level C
• Operating temperature - 20 °C to + 55 °C (short-time +70 °C)

Additional Benefits: directly exchangeable with ATC4401 (same dimensions and connectors), worldwide Net of licensed Becker-Service-Points.

Price: £1595.00 excl VAT; £1914.00 incl VAT

Becker BXP6401-1-(01) 250W Mode S Transponder
(Class 1– above 15,000ft)

Same as the BXP6401-2-(01) above but with higher power output

Principal features:

Based on proven ultra-compact and robust equipment technology, outstanding performance and low power-consumption. Utilizing an external address-module for air-craft data. This unique solution prevents programming errors and offers advantages in case of maintenance.

• Transmit power>=250 Watt
• VFR/IFR operation up to 50.000 feet.
• Standard input for parallel Blind-Encoder,
• Supplementary serial input for Becker Blind-Encoder
• RS 422/RS 232 interface for ADSB-capability in combination with suitable data-source
• Supply voltage 14 to 33 V DC
• Software certified to DO178 B Level C
• Operating temperature - 20 °C to + 55 °C (short-time +70 °C)

Additional Benefits: directly exchangeable with ATC4401 (same dimensions and connectors), worldwide Net of licensed Becker-Service-Points.

Price: £2,099.00 excl VAT; £2,518.80 incl VAT