LX avionics Ltd

With similar specifications to the ATR 600 but with 9 channel memory and other small differences, the ATR 500 transceiver fits in a standard 57 mm aviation housing and is 165 mm long (without connectors). Allow 50mm for connector and wires out.

Click here for the ATR 500 brochure (PDF 0.5Mb).

Certified by:
JTSO since 2003 (No LBA.0.10.911/113 JTSO)
FAA – TSO since 2003

Functions

• 57 mm panel cut out
• Easy operation with 2 line LC-Display
• VOX intercom
• 9 memory frequencies
• Auto TX off after 2 mins

Technical data

• Frequency range: 118.00MHz ... 136.975MHz
• Channel spacing: 25kHz
• HF output power approx 6W
• NF output power approx 4W
• Weight: approx 700 g
• Power consumption: approx 150mA standby; 1.8A during transmission
• Power supply: 10.5V – 14V
• Supplied with connector; optional pre-wired harness available See later in this section

Manufacturers price 949 euros plus VAT (approx £825.00 plus delivery to UK and VAT)
LX Price: £795.00 plus VAT £934.12 incl VAT
Order Code: ATR500

Found a lower price elsewhere? Then please tell us and we`ll endeavour to beat it .......

A plug and play solution for easy exchange of an ATR 57 transceiver to an ATR 500.

 

£62.00 excl VAT: £72.85 incl VAT
Order Code: ATR57500

 

No need to revamp your panel if your ATR 720 is beyond repair; just connect up the conversion kit and you can then operate an ATR 500 fitted where the ATR 720 used to be!

Adaptor cable £62.00 excl VAT, £72.85 incl VAT
Order Code:ADKA7250A

Adaptor plate £23.00 excl VAT, £27.25 incl VAT
Order Code:ADKAPL

Complete kit Price £85.00 excl VAT, £99.87 incl VAT Order Code: ADKAKit

The ATR 833 is an all new technology transceiver with many new features when compared to the previous ATR 600.

Available with Remote control for operation in tandem seated aircraft

Certification: ETSO Certification received on 26 10 2004: EASA 210.0193

New model - Now with extra bright display (OLED)

Click for the ATR 833 brochure (PDF 0.5Mb).

Functions

• 8.33 kHz channel spacing (but supports 25 kHz spacing)
• 57mm panel cut out
• 4 line LCD for easy operation
• Memorises frequencies with name codes
• Approx 100 ch memory with fast access
• Dual frequency watch (listen only on second freq)
• VOX intercom
• Auto Tx off after 2 mins
• Jeppesen database (please note that the integrated Jeppesen database is optional and is not warranted for integrity and accuracy but is offered as additional help and not as a primary source of information)

Technical Data

• Frequency range: 118.000MHz .... 136.975 MHz
• Channel Spacing: 8.33 kHz
• HF output power: approx 6W
• NF output power: approx 4W
• Dimensions: 57mm hole in panel; length 178mm (without connector)
• Weight: approx 700 g
• Power consumption: approx 150mA standby; 1.8A during transmission
• Power Supply: 10.5V – 14V
• Supplied with connector; optional pre-wired harness available See later in this section

Manufacturer's price 1,428 euro plus VAT (approx: £1240 plus delivery to UK and VAT)
LX Price £1191.00 excl VAT; £1399.42 incl VAT
Order Code: ATR833

Found a lower price elsewhere? Then please tell us and we'll endeavour to beat it .......

The ATR833A is a VHF radio in 160mm format with the new channel separation of 8.33 kHz. The channel spacing can be switched between 25kHz and 8,33kHz.

The built-in voice controlled intercom operates up to 4 microphones (2 standard, 2 dynamic). In many cases no extra intercom is required. This saves cost and weight. All headsets are separately adjustable. Using similar headsets a 4-place intercom can be built-up.

In addition to the standard functions there are 2 memory functions available: Up to 100 frequencies can be stored together with an
identifier. In addition, the 10 last used frequencies can be recalled easily. The OLED-display gives perfect readability under
all lighting conditions.

• VHF transceiver with 6W output power in 160mm format
• Satisfies upcoming equipage requirement for 8.33kHz channel spacing
• Automatic selection of 8.33kHz/25kHz spacing
• OLED display for best readability under all conditions
• Dual-watch technology, simultaneous monitoring of two frequencies
• Voice controlled intercom for up to 4 microphones, can be deactivated for use with external intercom
• Memory for up to 100 user-definable named frequencies
• Easy recall of the 10 last used frequencies
• Configurable energy saving mode

Specifications:

• Dimensions 160 x 41.3 x 175 mm
• Weight ca. 800g
• Power supply voltage 13,75V DC
• Current (standby) ca. 150mA
• Current (transmitting) ca. 1.8A
• HF Transmitter power 6W
• Audio output power 4W

Manufacturer's price 1,428 euro plus VAT (approx: £1240 plus delivery to UK and VAT)
LX Price £1191.00 excl VAT; £1399.42 incl VAT
Order Code: ATR833A

With similar specifications to the ATR 500 but with 100 channel memory and other small changes, the ATR 600 transceiver fits in a standard 57mm aviation housing and is 180mm long without connector. Allow 50mm for connector and wires out. Easy operation with four line LCD display.
HF-output - 6 watts approx.
Power consumption - 150mA (approx) in standby mode.
Power supply 10.5V to 14 V
Weight - 700 g

Although the ATR 600 is discontinued product support is still available.

ATR 833 Remote Control

Enables full remote operation (from the rear seat) of the ATR 833 and also the ATR 600 from version 2.1 . Supplied with full cable set.
Fits a standard 57 mm cutout,
only 45 mm deep (without connectors).
Weight 200 g.

Price £313.19 excluding VAT, £368.00 including VAT
Order Code: ATR833RT

---

GS6 Mobile Housing for ATR 500 or 600

See Balloon and Portable Avionics Section

 

---

AL 2000 Battery Charger

220/110 VAC, 50-60 Hz. 13.75 VDC, max 1 A. Fully automatic with status lights. With cable to connect to GS6 or 7. CE approved.

Price £75.00 excluding VAT,
£88.12 including VAT
Order Code: AL2000

 

---

Cable Assemblies for funkwerk avionics GmbH (formerly Filser GmbH) Transceivers

A wide range of pre-wired cable assemblies is available for the range of funkwerk avionics GmbH (formerly Filser GmbH) transceivers ranging from just the connector wired up to the complete assembly made up including headset sockets and the like. Purchasing a pre-wired assembly greatly simplifies installation.

View the new separate section on cable assemblies

---

VHF Antennas

We offer 2 models

Swept Rod - white
£107.00 excl VAT £125.72 incl VAT
Order Code: VHFANTWH

Steel Rod angled
£23.50 excl VAT £27.61 incl VAT
Order Code: VHFANTSW

 

---

Swan-neck Microphone

As fitted to most German-made gliders with mounting and 4 m of cable. Dynamic mic. 400mm neck.
(This is the microphone at the top of the image below.)

Price £76.00 excluding VAT, £89.30 including VAT
Order Code: ZSHM10

---

LX Swan-neck Microphone

Dynamic mic. Black finish. 400mm neck.
(The middle microphone, left)

Price £40.50 excluding VAT,
£47.59 including VAT
Order Code: LXSHMD

 

 

---

LX Swan-neck Electret Microphone

Electret mic. Black finish. 400 mm neck
(The lower one in the above picture.)

Price: £46.50 excluding VAT, £54.64 including VAT
(Compatible with Microair transceiver)
Order Code: LXSHME

Mounting Brackets for Swan-Neck Mics, in black

£3.25 excl VAT; £3.82 incl VAT

---

Loudspeaker (Glider Radio)

Lightweight and small loudspeaker with bracket suitable for use in gliders. Size 75 x 75 x 30mm deep.

 

 

Price £14.45 excluding VAT,
£16.98 including VAT
Order Code: LXBS4

 

 

---

Loudspeaker BS 4/8 Motor Glider and GA

High output speaker, prepared for DIN 5 pin. Ideal for cockpit environments requiring high volume and high fidelity output from a transceiver.

Price £88.00 excluding VAT,
£103.40 including VAT
Order Code: BS4/8

 

 

 

 

ATR 600 still boxed and never installed, EASA Form 1, Connector, Handbook

£749 or nearest offer. Contact: Debbie Hatelie [deborah@hatelie.orangehome.co.uk]