LX avionics Ltd

Features:

- Class 1 Level 2es
- Integral Alticoder (25ft increments)
- Brilliant display
- Pre-wired connector included
- EASA Approval number EASA21O.045
- ADS-B ready

The TRT 800H OLED is a new development of the well known TRT 800 series transponder and now features an ultra-bright display (OLED) that can be seen easily from almost any angle. As with the earlier models the alticoder is built in and installation is straightforward. It fits a standard 57mm aviation housing and measures approx 65 x 65 x 170 mm and produces 125 watts at the antenna. EASA approval number is: EASA.21O.269 and a Form 1 and A/C address connector is part of the standard delivery. If the optional TRT 800EMSS address adapter is fitted the RS 232 interface allows connection to a GPS reveiver to support ADS-B Out functionality (Broadcasting of own position for processing by other aircraft for collision avoidance.)

Click here for the TRT 800H OLED Brochure (PDF 0.6Mb)

Features:

- Class1 Level2es
- Integral Alticoder (25ft increments)
- Brilliant display
- Pre-wired connector included
- EASA Approval number EASA.21O.268
- ADS-B ready

The TRT 800A OLED is a development of the well known TRT series and now features an ultra bright display (OLED) that can be seen easiliy from almost any angle. Unlike the other TRT models, it fits the same panel slot as the KT 76 A series (but is much shorter and lighter) and installation is very straightforward. It produces 126 watts at the antenna and required power supply is 12 - 28 V DC.

Size is 170 mm (approx) behind panel plus 45 mm for connector. It is 140mm wide and 40 mm in height and weighs only 850 gms plus connector and cabling.

It is installed into the panel from the pilot side and, although a cradle is not required, you can either use the existing cradle by fixing the supplied brackets to each side of it or you can attach the brackets to the rear of panel.

Click here for the TRT 800A brochure (PDF 0.6Mb)

Features:

-Class 2 Level 2es
- integral alticoder (25ft increments)
- pre-wried connecter included
- EASA Approval Number EASA.21O.045

The TRT 800 is one of a new generation of small lightweight low power consumption transponders with Mode S as well as Modes A/C. An alticoder is built in and installation is very straightforward. It fits a standard 57mm aviation housing and measures 65 x 65 x 170mm and weighs approx 600 gm. It is designed to produce 71 watts at the antenna and is issued with an EASA Form (click on the table to the left to get more information)

Click here for the TRT 800 brochure (PDF 0.2Mb)

Price: £1126.50 excl VAT; £1295.47 incl VAT.

Call or email for availability

TRT Transponder Remote - under development

Enables rear seat occupant to operate the TRT transponder fitted in the front cockpit of a tandem seat aircraft. Will also be available later in a "black box" version to enable the transponder main unit to be mounted remote from the instrument panel

 

 
 

---

GS 9 Mobile Housing For TRT 800H OLED

For Balloons.

With rechargable battery and charger. Antenna fitted to top of unit is included. (Remote folded top antenna is option - £130.00 excl VAT)
Available only when ordered with a transponder and not on its own; this is for certification and warranty reasons.

Price - £2100.00 excluding VAT, £2415.00 including VAT
Order Code: GS9

---

Option Folded top antenna, for hanging outside of the balloon basket

Price: £130.00 excl VAT; £149.50 incl VAT

---

AL 2000 Battery Charger

220/110 VAC, 50-60 Hz. 13.75 VDC, max 1 A. Fully automatic with status lights. With cable to connect to GS6 or 7. CE approved.

Price £75.00 excluding VAT,
£86.25 including VAT
Order Code: AL 2000

---

TRT 800 EMSS

Main connector for TRT transponder with RS232 interface for connection to a datalink processor (COMM-A/B) or to a GPS system (ADS-B)

Price £115.00 excl. VAT; £132.25 incl VAT

---

Transponder Antenna with BNC connection

---

Antenna

Transponder Blade Antenna with BNC connection (uncertified)

 

£56.00 exc VAT, £64.40 inc VAT
Order Code: F1009

 

 

CI-105 Blade Antenna (TSO)

Price: £125.00 excl VAT; £143.75 incl VAT

 

Transponder Rod Antenna with BNC connection

 

£45.00 exc VAT, £51.75 inc VAT
Order Code: LXTRTR

 

 

AV-22 Transponder Rod Antenna (TSO)

Price £65.00 excl VAT; £75.75 incl VAT

 

---

Glider and Composite Aircraft "Transflex" Antenna

This antenna is designed specifically for gliders, other composite aircraft and is ideal for wood and/or fabric covered aircraft. It comes complete with ground plane for mounting inside the composite structure with the antenna outside. The antenna itself is flexible and designed to tolerate a wheels up landing or similar incident. Available with copper ground plane or wire mesh (the mesh is the easiest to bend to required shape and is a stock item.)

Price: £91.00 excl VAT; £104.65 incl VAT
Order Code: TRANSFLEX 02 (for mesh);
TRANSFLEX 01 (for copper sheet)

Transponder antenna for internal installation in GRP (not carbon) structures.
5m cable.

Price £60.00 excl VAT: £69.00 incl VAT

With a diameter of 160mm this self adhesive copper sheet is pre drilled to take the blade antenna and will be popular with the home installer for its ease of installation.

Price £15.95 excl VAT: £18.34 incl VAT
Order Code: F1010

Remember: Transponder antennas will not work properly without a ground plane.

All cables pre-assembled with BNC at one end and TNC at the other.

Length
2.0 metre - £44.00 excl VAT, £50.60incl VAT
2.5 metre - £44.00 excl VAT, £50.60 incl VAT
3.0 metre - £48.00 excl VAT, £55.20 incl VAT
4.0 metre - £48.00 excl VAT, £55.20 incl VAT
6.5 metre - £57.00 excl VAT, £65.55 incl VAT